Instant Adhesive Drop

Picatura is an instant adhesive based on cyanoacrylate, easy to use, intended for small repairs in the household. This type of adhesive bonds practically any type of material in just a few seconds and is used for repairs in the house, hobby activities and for practical work in general.

Features and advantages:

• allows drop by drop dosing;
• can be placed vertically on the work table;
• when in use, pressing the tube does not splash the adhesive;
• the adhesive does not flow out of the tube without pressing on the indicated areas;
• bonds any type of material: ceramics, plastic, wood, metal, rubber, porcelain.

Harmful to aquatic life with long lasting effects. Keep out of reach of children. In case of contact with eyes: rinse thoroughly for several minutes. In case of contact with skin: wash with plenty of water. If swallowed: rinse mouth. Do not induce vomiting. Call a poison center / doctor immediately. Dispose of contents / container to an appropriate waste collection point. Contains MEA-C10-13 Alkyl Benzenesulfonate, MEA-Laureth Sulfate, C12-14 Pareth-n.

Environmental - max 27 degrees C

Use:

• instant bonding of: metals, rubber (except silicone), porcelain, ceramics, plastic (except soft PVC and Teflon), wood, etc.;
• fixing and securing of: nuts and bolts, knots on the fishing line, plastic utensils, etc.;
• repairing of: jewelry, toys, dishes, rubber hoses, etc.

Does not bond polyethylene, polypropylene or Teflon®.

One drop is enough to bond a surface of approximately 4 cm2.

How to apply:

1. When opening for the first time, take the applicator tip assembly - cap and screw it completely onto the tube until the membrane is pierced.
2. Make sure that the surfaces to be bonded are clean, dry, free of grease and oxides. It is preferable to degrease the surfaces with alcohol.
3. The surfaces to be bonded must be assembled (joined) perfectly.
4. Use with care. Bonds skin and eyes in seconds.
5. If your fingers get stuck together, separate them slowly, under a stream of warm water.
6. Avoid contact with eyes. In case of an incident, do not close your eyelids, rinse with plenty of warm water and consult a doctor immediately.
7. Do not swallow. Keep the product out of the reach of children and animals.
8. Prolonged use can irritate the mucous membranes.
9. Contains cyanoacrylate.
10. Unscrew the cap from the applicator tip. Press on the areas indicated on the tube to dose and apply a single drop to one of the components to be bonded. Excess adhesive applied significantly delays hardening.
11. Press the components together so that they adhere, hold for 60 seconds and the assembly will be ready.